waterDataPreprocessing synchronousMemoryDatabase.c 张婷 commit at 2020-12-23

waterDataPreprocessing/dataProcessing/synchronousMemoryDatabase.c

@@ -0,0 +1,126 @@
+/*
+ * linux/arch/arm/mach-omap2/irq.c
+ *
+ * Interrupt handler for OMAP2 boards.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION		0x0000
+#define INTC_SYSCONFIG		0x0010
+#define INTC_SYSSTATUS		0x0014
+#define INTC_SIR		0x0040
+#define INTC_CONTROL		0x0048
+#define INTC_PROTECTION		0x004C
+#define INTC_IDLE		0x0050
+#define INTC_THRESHOLD		0x0068
+#define INTC_MIR0		0x0084
+#define INTC_MIR_CLEAR0		0x0088
+#define INTC_MIR_SET0		0x008c
+#define INTC_PENDING_IRQ0	0x0098
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG	32
+
+#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
+
+/*
+ * OMAP2 has a number of different interrupt controllers, each interrupt
+ * controller is identified as its own "bank". Register definitions are
+ * fairly consistent for each bank, but not all registers are implemented
+ * for each bank.. when in doubt, consult the TRM.
+ */
+static struct omap_irq_bank {
+	void __iomem *base_reg;
+	unsigned int nr_irqs;
+} __attribute__ ((aligned(4))) irq_banks[] = {
+	{
+		/* MPU INTC */
+		.nr_irqs	= 96,
+	},
+};
+
+static struct irq_domain *domain;
+
+/* Structure to save interrupt controller context */
+struct omap3_intc_regs {
+	u32 sysconfig;
+	u32 protection;
+	u32 idle;
+	u32 threshold;
+	u32 ilr[INTCPS_NR_IRQS];
+	u32 mir[INTCPS_NR_MIR_REGS];
+};
+
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+	__raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+	return __raw_readl(bank->base_reg + reg);
+}
+
+/* XXX: FIQ and additional INTC support (only MPU at the moment) */
+static void omap_ack_irq(struct irq_data *d)
+{
+	intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
+}
+
+static void omap_mask_ack_irq(struct irq_data *d)
+{
+	irq_gc_mask_disable_reg(d);
+	omap_ack_irq(d);
+}
+
+static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
+{
+	unsigned long tmp;
+
+	tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
+	pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n",
+		bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+
+	tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
+	tmp |= 1 << 1;	/* soft reset */
+	intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
+
+	while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
+		/* Wait for reset to complete */;
+
+	/* Enable autoidle */
+	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
+}
+
+int omap_irq_pending(void)
+{