Преглед изворни кода

waterDataDiscreteRateMining waterPressureDifference.c 朱俊杰 commit at 2020-09-24

朱俊杰 пре 4 година
родитељ
комит
31fa780c61

+ 125 - 0
waterDataDiscreteRateMining/standardDeviationCalculation/waterPressureDifference.c

@@ -0,0 +1,125 @@
+/*
+ * marzen board support
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
+#include <mach/hardware.h>
+#include <mach/r8a7779.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+#include <asm/traps.h>
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/* SMSC LAN89218 */
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x18000000, /* ExCS0 */
+		.end		= 0x180000ff, /* A1->A7 */
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= gic_spi(28), /* IRQ 1 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_platdata = {
+	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.dev  = {
+		.platform_data = &smsc911x_platdata,
+	},
+	.resource	= smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "sdhi0",
+		.start	= 0xffe4c000,
+		.end	= 0xffe4c0ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(104),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct platform_device sdhi0_device = {
+	.name = "sh_mobile_sdhi",
+	.num_resources = ARRAY_SIZE(sdhi0_resources),
+	.resource = sdhi0_resources,
+	.id = 0,
+	.dev = {
+		.platform_data = &sdhi0_platform_data,
+	}
+};
+
+/* Thermal */
+static struct resource thermal_resources[] = {
+	[0] = {
+		.start		= 0xFFC48000,
+		.end		= 0xFFC48038 - 1,
+		.flags		= IORESOURCE_MEM,