waterHeterogeneousDataSynchronization heterogeneousDataSynchronization.h 朱俊杰 commit at 2021-03-30

waterHeterogeneousDataSynchronization/dataCalculation/heterogeneousDataSynchronization.h

@@ -677,3 +677,118 @@
 #define SSEL			0x000F	/* System Select */
 #define CSEL			0x0030	/* Core Select */
 #define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
+#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
+#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
+#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
+#define FULL_ON			0x0002	/* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
+#define CANWS			0x0800	/* CAN Wake-Up Status */
+#define USBWS			0x2000	/* USB Wake-Up Status */
+#define KPADWS			0x4000	/* Keypad Wake-Up Status */
+#define ROTWS			0x8000	/* Rotary Wake-Up Status */
+#define GPWS			0x1000	/* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
+#else
+#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN			0x000C	/* Voltage Level Gain */
+#define GAIN_5			0x0000	/* GAIN = 5 */
+#define GAIN_10			0x0004	/* GAIN = 1 */
+#define GAIN_20			0x0008	/* GAIN = 2 */
+#define GAIN_50			0x000C	/* GAIN = 5 */
+
+#define VLEV			0x00F0	/* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#ifdef CONFIG_BF60x
+#define PA15WE			0x00000001 /* Allow Wake-Up from PA15 */
+#define PB15WE			0x00000002 /* Allow Wake-Up from PB15 */
+#define PC15WE			0x00000004 /* Allow Wake-Up from PC15 */
+#define PD06WE			0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */
+#define PE12WE			0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */
+#define PG04WE			0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */
+#define PG13WE			0x00000040 /* Allow Wake-Up from PG13 */
+#define USBWE			0x00000080 /* Allow Wake-Up from (USB) */
+#else
+#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
+#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
+#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
+#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
+#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
+#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
+#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
+#ifdef CONFIG_CPU_FREQ
+#define CPUFREQ_CPU 0
+#endif
+struct bfin_dpmc_platform_data {
+	const unsigned int *tuple_tab;
+	unsigned short tabsize;
+	unsigned short vr_settling_time; /* in us */
+};
+
+#endif
+
+#endif	/*_BLACKFIN_DPMC_H_*/