waterDataDiscreteRateMining analysisDataOperation.h 张婷 commit at 2021-03-15

waterDataDiscreteRateMining/databaseOperation/analysisDataOperation.h

@@ -181,3 +181,66 @@
 #define MCFGPIO_PASPAR		(MCF_IPSBAR + 0x00100056)
 #define MCFGPIO_PEHLPAR		(MCF_IPSBAR + 0x00100058)
 #define MCFGPIO_PQSPAR		(MCF_IPSBAR + 0x00100059)
+#define MCFGPIO_PTCPAR		(MCF_IPSBAR + 0x0010005A)
+#define MCFGPIO_PTDPAR		(MCF_IPSBAR + 0x0010005B)
+#define MCFGPIO_PUAPAR		(MCF_IPSBAR + 0x0010005C)
+
+/*
+ * PIT timer base addresses.
+ */
+#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x00150000)
+#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x00160000)
+#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x00170000)
+#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x00180000)
+
+/*
+ * 	Edge Port registers
+ */
+#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x00130000)
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x00130002)
+#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x00130003)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x00130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x00130005)
+#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x00130006)
+
+/*
+ * 	Queued ADC registers
+ */
+#define MCFQADC_PORTQA		(MCF_IPSBAR + 0x00190006)
+#define MCFQADC_PORTQB		(MCF_IPSBAR + 0x00190007)
+#define MCFQADC_DDRQA		(MCF_IPSBAR + 0x00190008)
+#define MCFQADC_DDRQB		(MCF_IPSBAR + 0x00190009)
+
+/*
+ * 	General Purpose Timers registers
+ */
+#define MCFGPTA_GPTPORT		(MCF_IPSBAR + 0x001A001D)
+#define MCFGPTA_GPTDDR		(MCF_IPSBAR + 0x001A001E)
+#define MCFGPTB_GPTPORT		(MCF_IPSBAR + 0x001B001D)
+#define MCFGPTB_GPTDDR		(MCF_IPSBAR + 0x001B001E)
+/*
+ *
+ * definitions for generic gpio support
+ *
+ */
+#define MCFGPIO_PODR		MCFGPIO_PODR_A	/* port output data */
+#define MCFGPIO_PDDR		MCFGPIO_PDDR_A	/* port data direction */
+#define MCFGPIO_PPDR		MCFGPIO_PPDSDR_A/* port pin data */
+#define MCFGPIO_SETR		MCFGPIO_PPDSDR_A/* set output */
+#define MCFGPIO_CLRR		MCFGPIO_PCLRR_A	/* clr output */
+
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		180
+
+/*
+ *  Reset Control Unit (relative to IPSBAR).
+ */
+#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
+#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
+/****************************************************************************/
+#endif	/* m528xsim_h */